PINCH BOLT; USE 5/16-18 x 1 INV-B516181
PINCH BOLT; USE 5/16-18 x 1 INV-B516181
DOWEL PIN STEPPED FOR USE WITH FG BEARING CARRIER ON FT MAINCASE. .656" LARGE END, .375 SMALL END.
FT200 MAIN CASE NEW STYLE WITHOUT CLUTCH LEVER HOLE; 6 SUSPENSION MOUNTING BOSSES UNDER DIFFERENTIAL SECTION. Hewland Part # FT201C, No Clutch Fork Hole
5/16" Size, 3.12" Length, 5/16x18 & 5/16 x 24 Thread. Hewland Part # FT2026
DETENT BALL, REVERSE, 5/16" Hewland Part # FT2033
USE IN MACHINED SEAL POCKET. Hewland Part # FT20357
PLANET BEVEL GEARS PWRFLO NST FTR SG3A
STUB AXLE, 4.44" DONUT DRIVE, 6-SPLINE
Hewland Part # FT2192, Standard Metalistic
Hewland Part # FT2192, 2" Thick Metalistic
RING & PINION 9:31 FT200. Hewland Part # FT221A
RING & PINION 8:31 FT200. Hewland Part # FT221B
RING & PINION 10:31 FT200. Hewland Part # FT221C
RING & PINION 13:36 FT200. Hewland Part # FT221M
The FT200 4-bolt pinion shim is no longer manufactured by Hewland (they have been replaced by a 7-bolt shim). Taylor Race Engineering is manufacturing these shims to support the vintage racer.